Chemical Dosing Controls

Produce your OWN Power By using a CHP System

What is CHP?

CHP is a “Combined Heat & Power” System. Simply put, it is an Engine. The Engine runs off Gas (of which can be bought in bulk a lot cheaper). The Engine runs a generator that produces Electricity – you can produce 90% of your electrical requirements.A bi-product of the running of an Engine is HEAT, produced from the exhaust. – attached to this is a Heat recovery system. This gives you FREE heat and can be used for all sorts of applications.You can use it to Heat Pool & Spa Water, Radiators, Showers & Taps, Even Air Handling systems.

 

> CHP Systems

ENERGY SAVING IN POOLS WITH AQS GROUP

A3000

In these times of increasing energy costs and greater understanding of personal and business responsibility for reducing CO2 emissions, any actions that can reduce energy usage need to be investigated, and if appropriate, instigated.

The A3000 from AQS can be used, not only to control the pH and chlorine dosing in a pool, but also to control the main re-circulating pump speed.

 

> A3000

HEAT PUMPS

A3000

THE FUTURE IS HERE...

Welcome to the best form of heating your pool when the outside temperature is above 15ºC.

 

Simply because itís inexpensive - to buy - to run - to install.

 

Realistically, in this country, all swimming pools whether above or in-ground, need heating to obtain the maximum use from the summer season.

 

> Heat Pumps

LED LIGHTING

Led Lighting

ENERGY SAVINGS
Energy cost per year for 100 standard 35-watt MR16 lamps = £6,132.00

Energy cost per year for 100 ARRAY LED 2.6-watt MR16 Lamps = £456.00

Your savings on energy cost per year for 100 lamps = £5,676.00


 

> LED Lighting

ENERGY SAVING EXAMPLE

Site Ref: Health Club Reception

 

Led Lighting

Number of lamps: 100 lamps
ARRAY LED lamp rated life: 50,000 hours
Standard lamp rated life: 2,000 hours
Cost per ARRAY LED lamp: £40.00
Cost per standard lamp: £1.00
Total operating hours per year: 8,760 hours
ARRAY LED MR16 wattage: 2.60 watts
Standard MR16 wattage: 35.00 watts
Energy cost per KwH: 0.200
Labour Cost per Hour: £5.00 per hour
Average time needed to replace one lamp: 5 minutes
Number of men needed to change lamps: 1 man

 

ENERGY SAVINGS

 

Energy cost per year for 100 standard 35-watt MR16 lamps = £6,132.00

Energy cost per year for 100 ARRAY LED 2.6-watt MR16 Lamps = £456.00

 

Your savings on energy cost per year for 100 lamps = £5,676.00

 

LABOUR SAVINGS

 

You will have to replace a standard 2’000hr MR16 lamp 4.38 times per year according to 8,760 hours (Full years use) and you will have to replace an standard 2’000hr MR16 lamp 25.0 times before an ARRAY LED 50’000hr MR16 lamp burns out.

For not having to be change 100 lamps you would save a total of £182.50 on labour cost per year.

 

Your total labour savings over 5 years will be £912.50

 

TOTAL SAVINGS

Total Costs for the first year of Operation 100 lamps including investment

 

 

Lamp Costs
Per year

Energy Cost
Per Year

Labour Cost
Per Lamp

Total

ARRAY LED lamp

£4’000.00

£456.00

£182.50

£4’638.50

Standard bulb

£438.00

£6’132.00

£182.50

£6’752.50

 

Full costs over the next 5 years for 100 lamps

 

Total Cost at the
end of:

Year 2

Year 3

Year 4

Year 5

ARRAY LED lamp

£5’094.50

£5’550.50

£6’006.50

£6’462.50

Standard bulb

£13’505.00

£20’257.50

£27’010.00

£33’762.50

 


ENERGY SAVING SOLUTIONS

> CHP Systems

> A3000

> Heat Pumps

> LED Lighting